With a standard maximum netting width of 5.4 m, the SLW-54C Gabion Box Machine provides a wide weaving platform for gabion mesh manufacturers. Five-axis coordination supports consistent forming across the working section. Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd. can discuss other working widths when customers need equipment adapted to a different product or workshop arrangement.
The netting is built by repeatedly positioning wires, twisting their connections and advancing the developing mesh. The Gabion Box Machine coordinates five servo drives so that these movements work together across the forming section. Correct setup is important throughout the working width: inspect openings and connections at several positions when approving a trial batch.
Typical openings are 60 × 80, 80 × 100 and 100 × 120 mm, with matching tooling required. Twist length is set from 40 to 70 mm through the XINJE HMI. Three-twist, five-twist, long and short pattern options allow the Gabion Box Machine to be configured for different confirmed forming specifications.
Arrange the wire supply and preparation stages to feed the weaving section in an orderly manner. After trial acceptance, netting is woven and collected for finishing. Where specified, CNC cutting, bending and shrinking and rolling equipment extend the route beyond the Gabion Box Machine. The downstream arrangement should suit the mesh width, product format and handling needs of the order.
Digital settings give operators a clear adjustment interface, while the simplified drive reduces the number of traditional mechanical links and wear points. These features make the wide weaving platform easier to manage during setup and upkeep. The advertised maximum output must be assessed against the chosen wire, mesh dimensions, twist arrangement, process and installation conditions.
Check the wire routes, working area and mesh collection path before starting. Confirm the selected tooling and enter the production settings through the HMI. Run a controlled trial, inspect the mesh across its width and continue only after acceptance. During production, observe feeding and collection so that a downstream handling problem does not interrupt otherwise satisfactory weaving.
Machine size, utility requirements and production capability should be considered together during factory planning. The dimensions and weight below are listed in the production-line specifications; confirm the final supplied configuration and installation arrangement before preparing the site.
|
5.4 m |
4 mm |
380 V |
|
Maximum width |
Max. galvanized wire |
Listed supply |
|
9.8 × 1.32 × 3.46 m |
19.5 t |
1000+ m²/hour |
|
Listed dimensions |
Listed weight |
Conditional maximum output |
Confirm the equipment footprint, service access, handling requirements and electrical supply with the manufacturer before installation. Keep people clear of moving mesh and collection equipment. Isolate relevant machinery before interventions, including connected auxiliaries where necessary. Follow the supplied instructions when clearing wire or making adjustments; machine dimensions alone are insufficient to define the full operating space.
Wide netting from the SLW-54C Gabion Box Machine can be processed into gabion products for river works, slope protection, roadside retaining structures and ecological restoration. Final sizes and fabrication details follow the intended project product. The manufacturer can help align the weaving width and supporting machines with the customer's planned production mix.
The supplied photographs show equipment display, factory installation, mesh weaving and wire-feeding arrangements, providing practical views of the machinery in different settings.
|
Showroom Display of Gabion Box Machine with Woven Mesh |
Gabion Box Machine in Operation at a Customer’s Factory |
|
Factory Setup of Gabion Box Machine with Wire Payoff Stands |
Gabion Box Machine Installation at a Customer’s Factory |
Contact Us at Any Time