Gabion mesh orders can differ in opening size, twist length and connection pattern. The SLW-54C Gabion Box Machine combines several forming options with five-axis servo control to address these requirements on one CNC platform. Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd. supplies the system with digital operation and tooling selected according to the confirmed mesh specification.
The listed choices include three twists, five twists, and long or short patterns. Twist length is adjustable from 40 to 70 mm through the HMI. These options are production variables to be selected for the order; the Gabion Box Machine should be evaluated using the required mesh design rather than assuming one pattern suits every application.
Guided wires are positioned and twisted to establish connections between the hexagonal openings. Mesh advance then presents the next forming position. By coordinating these repeating movements, the Gabion Box Machine supports consistent geometry along the netting. Five servo drives and XINJE PLC control provide the motion and control foundation for the selected forming arrangement.
Review the wire and finished mesh requirements, select the appropriate tooling and prepare the feed system. Set the desired twist length and applicable pattern parameters, then weave a trial sample. Inspect the sample before continuous production. The accepted mesh can proceed to collection, cutting or rolling according to the downstream equipment and order requirements.
A range of twist options and typical openings helps manufacturers plan different gabion mesh products within the machine's capability. Digital adjustment assists the changeover, while the simplified transmission makes maintenance more convenient. The Gabion Box Machine retains the need for suitable physical tooling when opening sizes change, so production planning should allow time for safe mechanical preparation and verification.
Stop the machine safely before any intervention that requires access to the forming area. Confirm the installed tooling, update the relevant settings and check the first mesh produced after the change. Measure twist length and review the connection pattern as well as the opening size. Resume the batch only when all inspected features match the approved production specification.
The listed maximum galvanized wire diameter is 4 mm and the standard maximum netting width is 5.4 m. Stay within the confirmed limits for the supplied setup. Keep hands away from twisting elements and moving netting, and isolate power before clearing or threading wire. Investigate irregular connections instead of compensating with uncontrolled parameter changes during production.
The matrix separates opening selection from twist settings so that buyers can discuss both parts of the specification. Compatibility of tooling and forming settings must be confirmed for the intended product.
|
Forming variable |
Available range |
Adjustment |
Inspection focus |
|
Opening |
60 × 80 / 80 × 100 / 100 × 120 mm |
Matched tooling |
Mesh dimensions |
|
Twist length |
40–70 mm |
HMI |
Connection length |
|
Twist arrangement |
3 / 5 twists |
Confirmed setup |
Twist formation |
|
Pattern |
Long / short |
Confirmed setup |
Pattern consistency |
Mesh produced by the SLW-54C Gabion Box Machine is used in downstream gabion fabrication for riverbank stabilization, retaining structures, slope protection and landscape erosion control. Customizable software and remote diagnosis support factory operation, with installation assistance available for the production solution. Application suitability depends on the finished mesh specification and the fabricated product's project requirements.
These four real equipment views illustrate woven mesh output, workshop installation and the layout of wire feeding, with captions matched to the visible machines and settings.
|
Showroom Display of Gabion Box Machine with Woven Mesh |
Factory Setup of Gabion Box Machine with Wire Payoff Stands |
|
Gabion Box Machine in Operation at a Customer’s Factory |
Gabion Box Machine in Operation at a Customer’s Factory |
Contact Us at Any Time