The SLW-54C Gabion Box Machine forms the weaving stage of a broader CNC production solution. Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd. offers supporting equipment that connects wire preparation with mesh finishing. This approach helps manufacturers plan the complete route from wire feeding to cutting and packing while confirming which machines and services belong in the agreed supply scope.
Five-axis linkage and five coordinated servo drives support stable mesh and twist formation. The control platform uses XINJE PLC and HMI, with in-house software that can be customized for logic, language and reports. The Gabion Box Machine also benefits from a simplified mechanical drive that reduces traditional transmission links and associated wear points.
Prepared wires enter the weaving section, where coordinated positioning and twisting create hexagonal netting. The woven material advances for collection and downstream work. The Gabion Box Machine establishes the mesh structure; cutting, bending and rolling equipment perform separate processing tasks. Matching these stages helps avoid planning a finishing arrangement that does not suit the weaving output.
Standard maximum netting width is 5.4 m, with other widths customizable. Typical openings are 60 × 80, 80 × 100 and 100 × 120 mm, and maximum galvanized wire diameter is 4 mm. Twist length is adjustable from 40 to 70 mm; three-twist, five-twist, long and short patterns are available within the confirmed setup.
Begin by defining the finished product and work backward through cutting, collection, weaving and wire preparation needs. Confirm compatible tooling for each target opening, then organize trial production through the selected stages. Packing belongs to the overall workflow, but the scope and level of automation at that stage must be established rather than assumed from the complete-line description.
Check that wire preparation, weaving and collection areas are ready before starting the production route. Establish acceptable trial mesh at the Gabion Box Machine, then verify downstream processing against the product dimensions. Monitor material transfer between stages and stop safely if accumulation or handling problems appear. Follow the supplied instructions for each auxiliary machine as well as the weaving unit.
Confirm the final equipment list, operating space, electrical requirements and service access before installation. Coordinate isolation when an intervention affects more than one machine. Keep clear of wire under tension, moving netting and cutting or rolling areas. Production capacity depends on the actual process and site conditions, including the ability of the selected downstream stages to handle the mesh output.
The resulting mesh can be fabricated into gabion products used in river training, roadside retaining, hillside stabilization and ecological restoration. Installation support helps customers establish the agreed production arrangement. A suitable SLW-54C Gabion Box Machine line connects the required product specification with practical preparation, weaving and finishing equipment rather than treating the weaving unit as the entire factory process.
The production solution offers the following equipment. The list describes the available line arrangement, not a fixed sequence for every product; preparation and finishing stages are selected according to the intended manufacturing process.
|
No. |
Production stage |
Listed equipment |
|
01 |
Wire preparation |
Five-roller unit; wire straightening machine |
|
02 |
Spring preparation |
CNC spring making machine |
|
03 |
Mesh formation |
SLW-54C Gabion Box Machine |
|
04 |
Finishing |
CNC bending; shrinking and rolling |
|
05 |
Sizing |
CNC mesh cutting machine |
The application gallery presents the supplied machinery photographs, covering the weaving area, controls and factory layout alongside an equipment display with finished mesh.
|
Gabion Box Machine Installation at a Customer’s Factory |
Showroom Display of Gabion Box Machine with Woven Mesh |
|
Gabion Box Machine in Operation at a Customer’s Factory |
Factory Setup of Gabion Box Machine with Wire Payoff Stands |
Contact Us at Any Time