The SLW-54C Gabion Box Machine manufactures hexagonal mesh that can be fabricated into gabion products for civil engineering and environmental work. Riverbank protection, slope stabilization and retaining structures are key applications for the woven mesh. Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd. supplies the weaving system and can plan auxiliary equipment around the customer's intended product range.
Typical mesh openings are 60 × 80, 80 × 100 and 100 × 120 mm. The standard maximum width is 5.4 m, while the listed maximum galvanized wire diameter is 4 mm. Opening changes require matching supporting plates and related components. The Gabion Box Machine should therefore be configured from a confirmed order rather than a general application name alone.
Five coordinated servo drives support mesh and twist formation under XINJE PLC and HMI control. Twist length is adjustable from 40 to 70 mm, with three-twist, five-twist, long and short patterns available. These functions give the Gabion Box Machine a controlled forming platform for different specified products, supported by customizable in-house software.
Different projects may call for different mesh dimensions and downstream fabrication. The Gabion Box Machine provides the woven material; the completed gabion product and engineering design determine how that material is used. Confirm the mesh specification with the buyer before choosing tooling and production settings.
|
PROTECTIVE APPLICATIONS |
MANUFACTURING REQUIREMENTS |
|
|
Project field |
Typical use |
Mesh supply focus |
|
River training |
Riverbank protection |
Specified mesh dimensions |
|
Slope protection |
Hillside stabilization |
Consistent connections |
|
Road engineering |
Retaining and reinforcement |
Required product sizes |
|
Ecological restoration |
Erosion and landscape protection |
Suitable fabrication |
Successive wire positioning and twisting cycles establish the connections that define the hexagonal mesh. Controlled mesh advance repeats the pattern along the netting. Coordination between these movements helps maintain the selected geometry. The resulting mesh must still be inspected against the order because machine capability alone does not establish acceptance of a particular production batch.
Translate the customer's required mesh and product dimensions into wire selection, tooling and forming settings. Prepare and feed the wire, thread the machine and produce a trial sample. After approval, continue weaving and collect the netting for cutting, bending or rolling as required. Finished gabion fabrication follows the product design and the supporting equipment included in the production route.
Review the order sheet before setup and check that the installed tooling matches the intended opening. Confirm HMI parameters and inspect trial mesh before accepting production. During weaving, observe feed stability and the forming result from a safe position. When starting another specification, repeat the verification process so that previous settings are not carried over without review.
Do not infer structural suitability or a project's load capacity from the machine specifications. Those matters depend on the finished product and engineering requirements. At the machine, isolate energy before threading or maintenance and keep clear of moving wire and mesh. Actual output varies with the material, process and operating environment; inspect quality as well as production quantity.
Digital adjustment, coordinated five-axis movement and simpler transmission help suppliers organize gabion mesh production and maintenance. Remote diagnosis can assist technical support, while a complete line can connect weaving with preparation and finishing. The SLW-54C Gabion Box Machine is particularly relevant when manufacturers need one platform for several confirmed mesh specifications across protective and restoration product orders.
The application gallery presents the supplied machinery photographs, covering the weaving area, controls and factory layout alongside an equipment display with finished mesh.
|
Gabion Box Machine Installation at a Customer’s Factory |
Showroom Display of Gabion Box Machine with Woven Mesh |
|
Gabion Box Machine in Operation at a Customer’s Factory |
Factory Setup of Gabion Box Machine with Wire Payoff Stands |
Contact Us at Any Time