Five Axis CNC Control and Complete Production Line
The SLW-54C Gabion Box Machine, manufactured by Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd., combines five-axis coordinated motion, servo-driven technology, and customizable PLC + HMI control for efficient gabion mesh production. With supporting equipment, the production line covers wire preparation, mesh weaving, cutting, selvedging, bending, roll winding, and packing.
The SLW-54C features a five-axis linkage system designed to coordinate weaving movements and maintain consistent mesh formation. Its touchscreen interface allows operators to set production parameters and monitor machine status.
· Five-axis coordinated drive for precise, stable motion.
· Servo-driven operation for controlled movement throughout the weaving cycle.
· PLC + HMI control with adjustable settings and customizable software.
· Adjustable twist length from 40 to 70 mm through the HMI.
· Multiple twisting options, including triple twist, five twist, and long or short twist configurations.
· Remote diagnosis and maintenance support to assist with troubleshooting.
· Automatic lubrication to support routine machine care.
The coordinated drive system helps maintain uniform mesh openings and repeatable twisting, supporting consistent production quality. Programmable control makes production settings easier to manage and reduces reliance on repeated manual adjustments.
The Gabion Box Machine can operate with supporting equipment as part of a complete production line. This helps manufacturers organize wire preparation, weaving, panel processing, and packing within a coordinated workflow.
Remote technical support assists with fault diagnosis, while in-house software customization allows control functions, interface languages, and production reports to be adapted to agreed requirements.
The SLW-54C produces woven gabion mesh that can be processed into gabion boxes, mattresses, and related mesh products. Finished mesh can be supplied as rolls or processed into panels for subsequent gabion fabrication and assembly.
|
Application |
Typical Use |
|
Slope protection |
Hillside and embankment stabilization |
|
River training |
Riverbank protection and channel improvement |
|
Road engineering |
Roadside retaining structures and slope reinforcement |
|
Soil and water conservation |
Erosion control and soil retention |
|
Ecological restoration |
Landscape protection and rehabilitation |
|
Retaining structures |
Stone-filled gabion walls and supporting structures |
The Gabion Box Machine combines HCFA servo motors with a XINJE PLC + HMI control system. Its in-house developed software supports parameter adjustment and customization.
|
Parameter |
Specification |
|
Model |
SLW-54C |
|
Drive configuration |
Five-axis linkage |
|
Mesh opening sizes |
60 × 80 / 80 × 100 / 100 × 120 mm |
|
Maximum weaving width |
5.4 m |
|
Twist length |
40–70 mm, adjustable through HMI |
|
Twist configurations |
Triple twist / Five twist / Long twist / Short twist |
|
Maximum galvanized wire diameter |
4 mm |
|
Servo motor configuration |
5 sets, 15 kW each |
|
Servo motor brand |
HCFA |
|
Control system |
XINJE PLC + HMI |
|
Software |
In-house developed, customizable |
|
Machine dimensions |
9.8 × 1.32 × 3.46 m |
|
Machine weight |
19.5 tonnes |
|
Rated voltage |
380 V |
|
Stated maximum output |
1,000+ m²/hour |
Actual output depends on mesh opening size, wire specifications, production settings, and operating conditions. Different mesh sizes may require corresponding tooling and setup adjustments.
The Gabion Box Machine forms hexagonal mesh by guiding and twisting adjacent wires in a controlled, repeating sequence.
Wire is supplied from the pay-off system and passes through the tensioning section. The weaving mechanism coordinates wire positioning, twisting, and mesh advancement to create successive rows of hexagonal openings. The servo-driven axes synchronize these movements according to the programmed settings.
The woven mesh then proceeds to roll winding or downstream panel processing, depending on the required finished product.
The production route varies according to whether the customer requires mesh rolls or gabion box components.
1. Wire preparation: Load suitable wire onto the pay-off stands and prepare the required spiral wires and reinforcing wires.
2. Tension adjustment: Set the five-roller tensioning unit to maintain controlled wire feeding.
3. Mesh weaving: Produce hexagonal mesh using the selected tooling and twisting settings.
4. Mesh cutting: Cut the woven mesh into panels of the required length.
5. Edge selvedging: Secure panel edges around reinforcing wires.
6. Panel bending: Bend processed panels to the required gabion configuration.
7. Inspection and packing: Check dimensions, mesh formation, and edge quality before bundling and packing.
For mesh roll production, woven mesh is directed to the compact roll winding machine. Spiral wire forming and wire straightening and cutting equipment prepare components needed for the selected product.
Before starting the Gabion Box Machine, inspect the guards, lubrication points, wire path, electrical connections, and emergency-stop devices. Confirm that the wire and tooling match the production order.
Load and thread the wire according to the machine manual, then adjust feeding tension. Enter the permitted production settings through the HMI and conduct a low-speed trial run.
Inspect the trial mesh for opening size, twist formation, width, and edge condition. Once the sample meets requirements, gradually increase to the approved production speed.
During operation, monitor wire feeding, mesh quality, alarms, and downstream equipment. Stop the machine before correcting wire tangles, clearing obstructions, or making mechanical adjustments.
· Operate the equipment only after receiving appropriate training.
· Keep guards fitted and stay clear of twisting mechanisms, rollers, cutters, and bending equipment.
· Isolate and lock out electrical power and any stored energy before maintenance or clearing jams.
· Use wire within the approved material and diameter range.
· Avoid excessive wire tension, which can affect feeding and mesh formation.
· Follow the specified lubrication schedule and inspect tooling and wear parts regularly.
· Back up approved production settings before changing software or control parameters.
· Investigate alarms and abnormal noise before restarting production.
Manufacturer: Anping Weaver Wire Mesh Equipment Manufacturing Co., Ltd.
Website: www.machine-gabion.com
Email: admin@machine-gabion.com
Contact Us at Any Time