|
Stainless Steel Automatic Wire Mesh Making Machine Heavy Duty BWR1300D
| Place of Origin | CHINA |
| Brand Name | APBWR |
| Certification | ISO9001 |
| Model Number | BWR130D-1RF |
wire mesh making machine heavy duty
,stainless steel mesh wire making machine
,stainless steel wire mesh making machine
Stainless Steel Automatic Heavy Duty Wire Mesh Weaving Machine BWR1300D
1.Heavy Duty Metal Wire Mesh Loom Performance Highlights
- Tight tolerance apertures at higher wire diameters
- Up to 120 rpm with clean selvedges(spec-dependent)
- Long-run stability:reduced drift, fewer density corrections
2. Heavy Duty Metal Wire Mesh Loom Operation & Process Notes
- Load wire, align guides → call the validated recipe by mesh spec
- Auto-tension ramp to setpoint → low-speed check → rated speed
- Endless take-up for long rolls / Straight-roll for discrete batches
- Inline length counter simplifies lot documentation
3. Quick FAQ
- Can it weave Dutch? — Yes(project-dependent), governed by recipe limits.
- Changeover time? — Minutes for standard count/wire swaps with stored recipes.
- Maintenance? — Daily checks + periodic PM；optional auto-lubrication reduces routine stops.
5. Heavy Duty Metal Wire Mesh Loom Specifications:
|
Feature Category |
Light-duty Loom (Model B) |
Heavy-duty Loom (Model D) |
|
|
Mesh Width |
1300mm 1600mm |
1300mm 1600mm |
|
|
Harness System |
Positive (Overhead) |
Negative (Bottom Cam) |
|
|
Web Removal Method / Doffing Method |
Continuous Web Removal or Direct Winding |
Continuous Web Removal or Direct Winding |
|
|
Wire Diameter Range |
Continuous Web Removal |
0.01 - 0.2 mm |
0.1 - 0.6 mm |
|
Direct Winding |
0.03 - 0.2 mm |
0.1 - 0.3 mm |
|
|
Mesh Count Range |
Plain Weave |
30 - 500 mesh/inch |
10 - 100 mesh/inch |
|
Twill Weave |
30 - 635 mesh/inch |
20 - 100 mesh/inch |
|
|
Dutch Weave |
100 - 2300 mesh/inch |
30 - 500 mesh/inch |
|
|
Beating-Up Frequency |
Max. 120 r/h |
Max. 100 r/h |
|
|
Motor Power |
2.2kw |
2.2kw |
|
|
Standard Configuration |
Crankshaft Type |
Bushing Type |
|
|
Side Frames |
Casting Wall Plates |
||
|
Tension System |
Tension Sensor |
||
|
Rapier Head Type |
Carbon Fiber |
||
|
Drive Type |
Fully Digital Control (CNC) |
||
6. Detailed Images:
Contact Us at Any Time
